AP11-109 Vibration / RMS Amplifier
FEATURES
- Vibration and RMS Amplifier
- 2 channels per card
- Isolated unbalanced input
- Insulated BVC connector
- Compatible in the RA2300MKII and RA2800A models
SPECIFICATIONS
Parameter | Specification |
Input | 2 channles per unit, isolated unbalanced input, isolated BNC connector |
Input Coupling | AC and DC coupling |
Input Impedance | 1MΩ or higher |
Power Supply for Sensor | 2mA, 18V or higher |
Measurement Range | 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500V |
Accuracy |
|
Voltage | Within ±0.3% FS (within ±0.8% FS at ±500V) |
RMS | Within ±2% FS (at DC and 40Hz to 20kHz) |
Linearity | within ±0.1% FS |
Crest Factor | 2.8 max (when used as RMS amp) |
CMV | Unit only : ±42V (DC or AC peak values) |
When using isolated BNC cable (optional) : 300VAC | |
Frequency Response | DC coupling : DC to 50kHz (+1, -3dB) AC coupling : 1 to 50kHz (+1, -3dB) |
Low-pass Filter | Butterworth type (attenuation factor: -24dB/OCT) 30, 100, 300Hz, 1kHz and OFF |
High-pass Filter | Butterworth type (attenuation factor: -24dB/OCT) 10, 30, 100Hz and OFF |
A/D Converter | 16-bit, 100kHz max |
Temperature Stability | Zero point : within ±0.02% FS/℃ Gain (range) : within ±0.01% FS/℃ |
Weight | 270g or less |
Need help or have questions?
Visit our support center for software downloads, warranty information, customer service, and to contact support.
